The Graphical User Interface Facilitates System Development, Simulation, and Characterization
|
The Z-One Graphical User Interface (GUI) supports dramatically simplified configuration and simulation for up to 32 power-system devices, including up to 4 analog components. User-defined settings can be programmed to individually-managed components or assigned to multiple devices as groups. |
This screen displays the output-voltage settings for three Z-POLs (blue boxes) and the address location for one analog device (magenta box). Two Z-POLs share the operating characteristics asigned to Group A. The remaining Z-One POL and analog device are managed as individual members of their respective groups. |
User-defined characteristics that can be group programmed include fault management, POL output voltages and currents, sequencing between components, and feedback-loop responses.
Fault and error propogation capabilities include conditional scenerios with multiple fault types affecting different component groups. An IBA bus converter (DC-DC front end) can also be controlled as the result of a fault scenerio.
>> Download the ZM7300 data sheet for more Z-One Digital IBA GUI information.
Admin |
Resources |
Universal Access |
PATs |
Z-Alliance |
Search Logic
© 2007 Power-One Copyright and Disclaimer
All information listed on this web site, to the best of Power-One's knowledge, was timely and accurate when written. Please note that you should not rely on the continued accuracy of any material beyond the date of issuance since the passage of time can render such information stale. All viewers should carefully check the dates of issuance of the material contained on this web site.